Heat Loss Calculation Tiny Township
CSA F280 heat loss calculations for Tiny Township building permits at the correct Climate Zone 6 design temperature — BCIN-stamped, accepted by the Township of Tiny Building Department, delivered in 48 hours.
A Tiny Township building permit requires a CSA F280 heat loss calculation at Tiny Township OBC January 2.5% design temperature of -24°C (Supplementary Standard SB-1) — Climate Zone 6. That places Tiny among the colder Zone 6 areas — similar to Barrie (-24°C) and noticeably colder than Toronto and the GTA (-18°C). We deliver a BCIN-stamped report with the MVDS and Schedule 1, formatted for the Township of Tiny Building Department. From $395, in 48 hours.
Tiny Township design temperature: -24°C (Zone 6)
Under OBC 9.33.2.2, your CSA F280 must use Tiny Township official January 2.5% heating design temperature from Supplementary Standard SB-1: -24°C, Climate Zone 6. North Simcoe areas including Tiny Township, Midland and Penetanguishene record one of the colder Zone 6 design temperatures, on par with inland Barrie (-24°C) and well below the Toronto/GTA assumption (-18°C) that contractors often copy. Using the wrong design temperature is the most common reason reports are returned. Check yours with our free design temperature lookup.
| Area | Design Temp | Zone |
|---|---|---|
| Toronto / GTA | -18°C | 5 |
| Collingwood | -21°C | 6 |
| Tiny / Midland / Penetanguishene | -24°C | 6 |
| Muskoka | -26°C | 7 |
What a Tiny Township permit package needs
A complete package includes a CSA F280 heat loss report at -24°C, mechanical drawings, the MVDS ventilation summary (mandatory under OBC 2024), and the Schedule 1 designer declaration — every page BCIN-stamped, formatted for the Township of Tiny Building Department. See our permit requirements guide.
Heat pumps and sizing at -24°C
At Tiny Township -24°C design day, a cold-climate (CCASHP) heat pump typically delivers roughly 55-70% of its rated capacity, so the unit must be checked against the calculated load at -24°C, not the nameplate. Well-insulated homes can run all-electric, but at this design temperature backup heat is often appropriate. The room-by-room CSA F280 at -24°C confirms the right size; see our cold climate heat pump guide.
Heat Loss in Tiny Township — FAQ
What design temperature is used for Tiny Township?
-24°C, the Tiny Township OBC January 2.5% value from SB-1 (Climate Zone 6) — among the colder Zone 6 areas, similar to Barrie (-24°C) and well below Toronto/GTA (-18°C). Midland and Penetanguishene share -24°C.
How much does it cost and how fast?
CSA F280 reports start at $395 flat, BCIN-stamped, quoted within 24 hours and delivered within 48 hours of payment. A full HVAC design package starts at $695.
Can a cold-climate heat pump heat a Tiny Township home?
Yes for well-insulated homes — but at -24°C a CCASHP delivers roughly 55-70% of rated capacity, so output must be checked against the CSA F280 load and backup heat is often appropriate.
Do Midland and Penetanguishene use the same value?
Yes — Midland and Penetanguishene use the same -24°C Zone 6 design temperature as Tiny Township.
Related Services & Areas
Building in Tiny Township? Heat loss report in 48 hours.
Upload your plans and we confirm Tiny Township SB-1 design temperature (-24°C, Zone 6), produce the BCIN-stamped CSA F280 and full permit package, and format it for the Township of Tiny Building Department.
Order a ReportGet a Free Quote