Heat Loss Calculation — York Region
BCIN-stamped CSA F280 heat loss calculations and HVAC design for every York Region municipality — sized to the correct Climate Zone 6 design temperature for your town, formatted for the local building department.
York Region municipalities fall in Climate Zone 6 with OBC January 2.5% design temperatures of about -21°C to -22°C (Supplementary Standard SB-1) — colder than Toronto and the GTA at -18°C, so GTA assumptions undersize equipment. Markham, Richmond Hill, Vaughan, Aurora and King are around -21°C; Newmarket is -22°C. We deliver BCIN-stamped CSA F280 reports for any York Region town from $395, in 48 hours.
York Region design temperatures (Zone 6)
Under OBC 9.33.2.2, your CSA F280 calculation must use the official January 2.5% heating design temperature for your town from Supplementary Standard SB-1. Every York Region municipality is in Climate Zone 6 and colder than Toronto/GTA (-18°C, Zone 5) — a common mistake that undersizes equipment. Confirm your value with our free design temperature lookup.
| Municipality | Design Temp (2.5%) | Zone |
|---|---|---|
| Toronto / GTA (for comparison) | -18°C | 5 |
| Markham | -21°C | 6 |
| Richmond Hill | -21°C | 6 |
| Vaughan | -21°C | 6 |
| King (King City) | ~-21°C | 6 |
| Aurora | -21°C | 6 |
| Newmarket | -22°C | 6 |
| East Gwillimbury / Georgina (northern, Lake Simcoe) | ~-22°C | 6 |
Northern York Region towns near Lake Simcoe (East Gwillimbury, Georgina) trend toward the colder end; we confirm the exact SB-1 station value for your specific project before calculating.
What a York Region permit package needs
A complete package includes a CSA F280 heat loss report at your town design temperature, mechanical drawings, the MVDS ventilation summary (mandatory under OBC 2024), and the Schedule 1 designer declaration — every page BCIN-stamped. Important: York Region does not issue residential building permits; each lower-tier municipality runs its own building department, so we format the submission for your specific town (Markham, Vaughan, Richmond Hill, Aurora, Newmarket, King, Whitchurch-Stouffville, East Gwillimbury or Georgina).
Dedicated York Region pages
York Region Heat Loss — FAQ
What design temperature is used across York Region?
York Region municipalities are Climate Zone 6 with OBC January 2.5% design temperatures of about -21°C to -22°C from SB-1 — colder than Toronto/GTA at -18°C. Markham, Richmond Hill, Vaughan, Aurora and King are around -21°C; Newmarket is -22°C. We confirm the exact value per town.
Does York Region or my town issue the building permit?
Your local municipality does. York Region (the upper tier) does not process residential building permits — Markham, Vaughan, Richmond Hill, Aurora, Newmarket, King, Whitchurch-Stouffville, East Gwillimbury and Georgina each run their own building department. We format the package for your town.
How much, and how fast?
CSA F280 heat loss reports start at $395, BCIN-stamped, delivered in 48 hours. A full HVAC design package with mechanical drawings, MVDS and Schedule 1 starts at $695.
Can a cold-climate heat pump work in York Region?
Yes, for well-insulated homes — but at -21°C to -22°C a CCASHP delivers roughly 65-75% of rated capacity, so output must be checked against the CSA F280 load and backup heat is more often appropriate than in the milder GTA.
Building anywhere in York Region? Report in 48 hours.
Upload your plans and we confirm your town SB-1 design temperature (-21 to -22°C, Zone 6), produce the BCIN-stamped CSA F280 and full permit package, and format it for your municipality.
Order a ReportGet a Free Quote